Click here to view other SPS.
| Item | Description | Image | RRP AUD |
| ML-8 | MIKE LITE: (NVG Green light). The standard issue military Mike Lite. Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation -3- product using 3 ea. LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 ea. AA batteries (not included). | 
|
$61.60 |
| ML-11 | MIKE LITE: (IR & NVG Green light). One Infrared LED and Two NVG compatible Green LEDs. Switch from IR to Green at the battery pack. Use Green for NVG compatible light. Use IR to enhance ambient light with NVGs. IR light shines over 150 feet. Uses 2 ea. AA batteries (not included). |
|
$84.70 |
| ML-18 | MIKE LITE: (White light). Has three White LEDs. Because LEDs do not produce heat they are invisible to FLIR systems. They also work well with Gen III goggles. For use where dark adaptation is not necessary and where a bright, white light is desired. LED average output is 1.2 Fc at 18". LEDs last indefinitely. Uses 2 ea. AA batteries (not included). |
|
$77.00 |
| ML-22 | MIKE LITE: (2ea. NVG compatible Standard Green LEDs and 1ea. NVG compatible White LED) Use Green when preserving dark adaptation is desirable. Use White when seeing colors is necessary. While the White Light is not as bright as the Xenon lamp on the ML-14 or ML-14A it is a LED and will not break if dropped. Also the White LED uses far less power than the Xenon lmap and will burn continuously for 7 days on a pair of AA batteries. |
|
$77.00 |
| FL-5 | FINGERLITE: (NVG Green light). The standard issue military Fingerlite. Compatible with all night vision goggles and devices. Preserves dark adaptation. Uses 2 ea. A76 alkaline batteries (included), or for extreme climates use One DL1/3N Lithium battery. A generation -3- product. Can be worn on any finger of either hand using stretch Velcro. Has a Push ON - Push OFF switch. | 
|
$55.00 |
| FL-8 | FINGERLITE: (White light). Compatible with Gen III night vision goggles and devices. Has bright white light. Use to see colors. Uses 2 ea. A76 alkaline batteries (included), or for extreme climates use One DL1/3N Lithium battery. A generation -3- product. Can be worn on any finger of either hand using stretch Velcro. Has a Push ON - Push OFF switch. |
|
$55.00 |
| FL-9 | Finger Lite (1 Amber LED light- non NVG). |
|
$55.00 |
| LS-1 | LIGHT SOURCE: (Red). This sugar cube sized light will emit a blinking RED light continuously for up to 1 month on one 9 V battery. | 
|
$25.30 |
| LS-2 | LIGHT SOURCE: (Infra-red). This sugar cube sized light will emit a blinking IR light continuously for up to 1 month on one 9 V battery. | 
|
$25.30 |
| CL-11 | Cap Light (3 White LED-9V) NVG Friendly. | 
|
$77.00 |
| CL-16 | Cap Light (3 Brt Green LED) | 
|
$61.60 |
| TS-2 | Test Set, TS-2 used for testing Night Vision Goggle (NVG) Mount Assemblies and NVG Power Pack Assemblies. Designed for use by all crewmembers; thus allowing them to test their equipment BEFORE mission start time. Performs the same NVG tests as the TS-3895A/UV costing thousands of dollars. The TS-2 will test the standard NVG Mount Assembly for continuity as well as test the Power Pack Assembly and other similar earlier battery packs for continuity, and low or missing batteries. Also used to test the Case Battery Assembly (Clip on Power Source—COPS) for continuity. | 
|
$150.7 |
| MK-1 | Mount Kit (for ML-8, 11, 18, 22). Mounts the Mike Lites above to a variety of aviator microphones. Comes with an assortment of clips to attach the Mike Lite to all but the thinnest of mike booms. Of course like all of our products it is guaranteed to work. NOTE: This item not required for military helmets using the standard M-87 or the M-162 Tempest microphones such as the SPH-4 and HGU-56 helmets. All Mike Lites already include necessary hardware to attach to these standard helmets. However, if your unit has replaced the standard microphone with something else, then this MK-1 kit is probably needed. | 
|
$6.05 |
| BW-1 | WEIGHT BAG: Black, Cordura Nylon. For holding lead shot used to counterweight NVGs. Comes with a plastic 6 Mil. Zip-Lock bag to hold loose weights securely in the bag. Bag has double flap, and a full width 50mm Velcro mounting strip. Bag is 115mm wide X 90mm high. | 
|
$7.15 |
| MK-1Bose | Mount Kit (for Bose X headsets). | No Image | $4.40 |
RRP includes GST.
NOTE
MIKE LITES ARE DESIGNED SPECIFICALLY FOR NATO (MILITARY) STYLE MICROPHONES BUT CAN BE ADAPTED TO MOST GA STYLE MICROPHONES. OPTIONAL MOUNT KIT required for boom type mikes.
SUPPORT PILOT SERVICES RECOGNISE THAT THERE ARE SO MANY DIFFERENT STYLES OF GA MICROPHONES THAT IT IS IMPOSSIBLE TO KNOW WHICH MICROPHONES ARE SUITABLE OR NOT FOR MIKE LITE FITMENT.
THEREFORE SUPPORT PILOT SERVICES GUARANTEES THAT IF A MIKE LITE CAN NOT BE FITTED, USING THE OPTIONAL MOUNT KIT, RETURN BOTH THE MIKE LITE AND MOUNT KIT IN THEIR ORIGINAL PACKAGING UNDAMAGED (except some of the plastic ties which would of been consumed in the mounting process) WITH YOUR INVOICE WITHIN 10 DAYS OF DELIVERY AND YOUR PURCHASE PRICE WILL BE REFUNDED LESS THE DELIVERY POSTAGE AND PACKING.